Modified Filled With Glass Microsphere PTFE Skived Sheet Thickness From 0.5mm ~ 5mm length In Rolls
APPLICATION CONDITIONS(MEDIUM)
- moderate concentration of acid,some corrosion,hydrocarbons,solvents,water,refrigerants,cryogenic materials,hydrogen peroxide
- acetic acid,pharmaceutical clean pipelines,glass lining flange ave better surface roughness,surface defects,uneven flange,heat exchange etc.
The following chemicals are intolerant
- Fluoride dioxide,,hydrofluoric acid,hydrogen fluoride,concentrated sulfuric acid,sodium cyanide
- Weak in NaoH resistance
PTFE has a coefficient of friction that is one of the lowest of any material ,between 0.05 and 0.09 PTFE also is extremely corrosion resistant ,especially to acids ,harsh inorganic and organic chemicals ,it is attacked only by the alkaline metals in the elementary state ,by Chlorine trifluoride and by elementary Fluorine at high temperature and pressures .In addition ,PTFE can withstand a wide of temperatures ,from 260℃ down to -180℃.
The extraordinary characteristics of PTFE makes it the ideal choice in a wide range of applications ,such as chemicals ,petrochemicals ,fertilizers ,agrochemicals ,dyestuff ,textile ,paper ,clothing ,building ,food processing plants and valves industries .
MAIN PROPERTIES
| Inspection Item | Unit | Standard |
| Work Temperature | ℃ | -200 ~ +200 |
| Tensile Strength | Mpa | ≥10 |
| Compression Rate | % | ≥16 |
| Rebound Ratio | % | ≥32 |
| Continuous Max Pressure | Bar | 55 |
| Gas Permeability | cm3/s | <1x10~3 |
| Creep-Relaxation | % | 40 |
| Density | g/cm3 | 1.6 ~ 1.7 |
TYPES AND SPECIFICATIONS
Regular :Width x Length: 1500 x 1500mm; 1524 x 1524mm
Thickness: 0.5,0.8,1.0, 1.5,1.6,2.0,3.0,3.2,6.0 mm
We can offer SPECIAL SIZE as customers Requirements
FEATURES
- 1. High Temperature Resistance-Use Working Temperature Up To 250 ℃.
-
- 2. Low Temperature Resistance-Has Good Mechanical Toughness; Even If The Temperature Drops To -196 ℃, It Can Maintain 5% Elongation.
-
- 3. Corrosion Resistance-For Most Chemicals, It Is Inert, Resistant To Strong Acids And Alkalis, And Water.
-
- 4. Weather Resistance-Good Aging Life In Plastics.
-
- 5. High Lubrication-Is The One With Lower Friction Coefficient In Solid Materials.
-
- 6. Non-Adhesion-It Is A Very Small Surface Tension In Solid Materials And Does Not Adhere To Any Substance.
-
- 7. Safety-With Physiological Inertia, As Artificial Blood Vessels And Organs Implanted In The Body For A Long Time Without Adverse Reactions.
1) Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2) Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3) General samples time can be arranged within 2--5days.
4) Orders will be produced exactly as request and approved samples.
5) When mass production,we send photos to show the production line.And confirm the estimate time again.
6) At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7) Before shipment,our QC will have inspection to make sure the quality.
8) We always try best to ensure every order to delivery in time.
Payment Terms
1) T/T,Cash,L/C.
2) 30% deposit,70% balance before shipment.
3) Lead time: 15 days after received deposited for 2tons.
4) Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Product Tags:
|
|
Glass Filled Soft Microsphere 10Mpa PTFE Moulded Skived Sheet Images
|
