Extruded Nylon Plastic Sheet
Extruded nylon is the most important engineering plastics.The product is widely used in almost every fields and it's the most widely used plastic of the five engineering plastics.
PA6 is a translucent or opaque milky crystalline polymer which is made from polymerized caprolactam monomer at high temperature.The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance.All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.
The orginal color of the PA6 Sheets is .Milky white.
our PA6 sheet is made of BASF or DSM materials,have good mechanical properties, uniform thickness, and compact interior.
Application:
1. Fan blades, structural panels, wear pads;
2. Bearing parts, gear wheels, pump parts, parts in the automotive manufacturing;
3. Sliding rails, castors, fittings etc.
Advantage:
1. High strength and stiffness;
2. High impact and notch impact strength;
3. High heat deflection temperature;
4. Good at dampening;
5. Good abrasion resistance;
6. Low coefficient of friction;
7. Good chemical stability against organic solvents and fuels;
8. Excellent electrical; properties, ease of printing and dyeing;
9. Food safe, noise reduction.
| PA6 PHYSICAL PROPERTY TABLE |
| | Content/Feature/Property | Test method | Unit | Value |
| Mechanical property | Tensile strength | ISO 527-1, 2 | Mpa | 78 |
| Bending strength | ISO 178 | Mpa | 100 |
| Bending tensile stress | ISO 527 | Mpa | 76/- |
| Stretching strain at break | ISO 527 | % | >50 |
| Tensile modules of elasticity | ISO 527 | Mpa | 3250 |
| Compressive stress under 1% and 2% normal strain | ISO 604 | Mpa | 24/46 |
| Pendulum impact test | ISO 179/1eA | kj/m2 | 5.5 |
| Rockwell hardness | | HR | R106 |
| Physical property | Density | ISO 1183 | g/cm3 | 1.14 |
| Water absorption (23℃ water soak for 24 hours) | ISO 62 | % | 1.28 |
| Coefficients of linear thermal expansion (23-100℃ average value) | | m/(m.k) | 90×10-6 |
| Flammability (UL) | UL94 | | HB |
| Heat resistance | Melting point | | ℃ | 220 |
| Temperature resistance (continuous) | | ℃ | 80 |
| Temperature resistance (short time) | | ℃ | 120 |
| Insulating property | Dielectric strength | ISO 60243 | kv/mm | 25 |
| Volume resistance | ISO 60093 | Ω·cm | 1O14 |
| Surface resistance | ISO 60093 | Ω | 1O13 |
| Relative permittivity -100HZ/1MHZ | ISO 60250 | | 3.9/3.3 |
| Chemical property | Acid resistance | | | ﹢/0 |
| Alkali resistance | | | + |
| Carbonation resistance | | | ﹢/0 |
| Aromatic compounds resistance | | | ﹢/0 |
| Ketone resistance | | | + |
| Other | Adhesion | | | + |
| Friction coefficient | | | 0.36 |
| Food contact | | | + |
Our Service
1) Your Inquiry Will Be Replied Within 2 Hours During Working Time,Within 24hours When Rest Time.
2) Our Working Time Is 7.30 AM --17:30 PM,Monday To Saturday.
3) General Samples Time Can Be Arranged Within 2--5days.
4) Orders Will Be Produced Exactly As Request And Approved Samples.
5) When Mass Production,We Send Photos To Show The Production Line.And Confirm The Estimate Time Again.
6) At The End Of Mass Production,Photos And Samples Will Send To You For Approval.You Can Arrange The Inspection.
7) Before Shipment,Our QC Will Have Inspection To Make Sure The Quality.
8) We Always Try Best To Ensure Every Order To Delivery In Time.
Payment Terms
1) T/T,Cash,L/C.
2) 30% Deposit,70% Balance Before Shipment.
3) Lead Time: 15 Days After Received Deposited For 2tons.
4) Delivery Way: By Sea,By Air, By EMS,DHL,UPS,TNT,FedEx.
Packing & Delivery
For Sample: By EMS,DHL,UPS,TNT,FedEx
Around 5--7 Working Days To Arrive
For Bulk Order:
1. Qty Of 2tons,Within 15 Days.
2. Via Sea
3. Delivery Time:we Will Finish Production In 15days For 2tons.
4. For 20 GP,May Nee Around 30days.
Our Company
Product Tags:
|
|
Pa6 Nylon Plastic Sheet Images
|
