100% Virgin Thickness 1mm ~ 6.5mm White PTFE Skived Sheet Rolls 10M 20M 30M
FEATURES
Polytetrafluoroethylene sheet by suspension polymerization of PTFE resin molding. It has the best chemical resistance in known plastics and does not age. It has the best coefficient of friction in known solid materials and can be used at -180 ° C to +260 ° C without load.
- High temperature resistance-use working temperature up to 250 ℃.
-
- Low temperature resistance-has good mechanical toughness; even if the temperature drops to -196 ℃, it can maintain 5% elongation.
-
- Corrosion resistance-for most chemicals, it is inert, resistant to strong acids and alkalis, and water.
-
- Weather resistance-good aging life in plastics.
-
- High lubrication-is the one with lower friction coefficient in solid materials.
-
- Non-adhesion-It is a very small surface tension in solid materials and does not adhere to any substance.
-
-
- Safety-with physiological inertia, as artificial blood vessels and organs implanted in the body for a long time without adverse reactions.
SPECIFICATION
| PTFE Molded Sheet,Skived Sheet/Tape |
| Type | Thickness(mm) | Width(mm) | Length(mm) |
| PTFE Skived Sheet | 0.2 ~ 6.5 | 300 ~ 2700 | ≥ 200 |
| PTFE Skived Tape | 0.1 ~ 4.0 | 100 ~ 500 | ≥ 1000 |
MAIN PROPERITES
| Properties | Unit | Result |
| Apparent density | g/m3 | 2.10~2.30 |
| Tensile strength(min) | Mpa | 15.0 |
| Crack elongation(min) | % | 150 |
| Dielectric strength(min) | Kv/mm | 10 |
APPLICATION
PTFE has outstanding excellent comprehensive performance, high temperature resistance, corrosion resistance, non-stick, self-lubrication, excellent dielectric properties, and very low coefficient of friction.
Used as engineering plastics, it can be made into PTFE tubes, rods, belts, plates, films, etc.
Generally used in corrosion-resistant pipes, containers, pumps, valves, radar, high-frequency communication equipment, radio equipment, etc. with high performance requirements.
Add any filler that can withstand the sintering temperature of PTFE in PTFE, its mechanical properties can be greatly improved. At the same time, maintain other excellent performance of PTFE. Filled varieties include glass fiber, metal, metalized oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc., wear resistance, limit PV value can be increased by 1000 times. Painted on the surface of bullet bullets can increase bullet penetration and enable bullets to penetrate bulletproof vests.
Product Tags:
|
|
Roll Virgin Plastic PTFE Images
|
